About This Item
Actual item is shown. Only what is shown is included. Used unit reconditioned thoroughly in our factory shop and performing to new oem specs. Pictures are of actual unit, so please review pictures for detail on condition and interfaces. The machine was operated in all modes and found to grind paper per specifications. The result is shown in the pictures. This unit is designed for commercial duty applications. We guarantee this machine to perform as we have described upon receipt.

NOTE - INCLUDES The BiJur TM-5 Automatic Oiler System, Installed and calibrated - a $495 Value!

Notes from our Tech when ReConditioned
This is an advanced German designed and made microshred machine. The cutter block assembly in this machine will pass a full performance audit. The shredder cutter block was examined in our factory dealer shop and certified to meet a security audit - meaning there are zero broken teeth or strippers and 100% of all paper passed through will comply with the NSA 02-01 spec for Level P-7. It will be impossible for any shreds to be reconstructed. We ran several hundred pages through it after going through our shop, with no issues whatsoever. The machine was load tested and found to pass the spec 6 sheets per pass - constantly (per new spec). The sensors were performance tested and all work as intended. The machine was fully cleaned and lubed. All drivetrain components checked for wear. The mill and all components performing per oem specification. The case will show some blemishes consistent with use of a machine of this type and we have pictured those blemishes.

Serial No - 00717

Machine ID - 30.01.20634-01

MPN - 20634 EC

Level 6 MicroShredder
This is one of the highest throughput Level 6 (guaranteed audible NSA 0201 machine) machines in it's class (1.25 HP). If you have security requirements - this machine is a set it and forget it solution.

NSA One Hour Durability Rating Certification - Rated by the NSA at 10 reams / 3 sheets per pass

 
Know What You are Buying

• We typically take the time to post actual pictures of the unit you are buying
• We also typically take the time to thoroughly test the units we are selling
• Buy with CONFIDENCE from a reputable seller with 20 Years experience

WARRANTY - BUYER will enjoy a full performance warranty for 180 days. We will replace defective components or refund / exchange the machine if it fails to operate as we have described for a period of 180 days in accordance with our terms in our guarantees section below.

Specifications

Maximum Particle Area: Ninety percent (90%) of the shredded particles shall not exceed five square millimeters (5 mm²).

  Maximum Particle Width: Seventy five percent (75%) of the shredded particles shall have no edge dimension exceeding five millimeters (5mm) in length.

  Durability: Shredder shall operate continuously for one (1) hour, shredding paper at a feed rate prescribed by the manufacturer, and consistently produce particles that meet specification requirements.

Features

• The Dahle 20634EC High Security Shredder is NSA/CSS 02-01 approved for the shredding of confidential government documents.
• Ideal for small offices and military, federal, state or local departments as well as department of defense contractors.
• Shreds up to 8 sheets of paper at speeds up to 26' per minute.
• Cross-cuts documents into 1mm x 4.7mm particles.
• Every sheet becomes 15,500 tiny particles.
• 16 gallon waste bin.
• Automatic on/off, reverse, and bag full auto off.
• 10" wide feed opening.
• Powered by a 1 horsepower motor.
• Chain driven to provide slip free power while shredding.

Specifications