About This ItemActual item is shown. Only what is shown is included. Used unit, but reconditioned by our team to and recertified to perform to oem manufactuer spec, in great condition and ready to work. Please understand the machine is being reconditioned by an authorized HSM shredder dealer, not machine-flippers.Pictures are of actual unit, so please review pictures for detail on condition and interfaces. The machine was operated in all modes and also found to grind paper per specifications. The result is shown in the pictures. This unit is designed for commercial duty applications. We guarantee this machine to perform as we have described upon receipt.
Notes from our Tech when ReConditionedThis is a very heavy duty level 3 (medium security) shredder with high volume capabilities. Shreds perfectly - see the result. We ran several hundred pages through it after going through our shop, with no issues whatsoever. Bearings were lubed. The sensors were performance tested and all work as intended. The machine was fully cleaned and lubed. All gears were checked for wear. We replaced the caster set and improved to heavier than new. The door was repaired and re-mounted on the machine, again heavier than new.
Note this model machine is currently offered new elsewhere for $3995.Serial No - OMI797ID No - 1757660
Shred Size - 4 x 40 mm
California Compliant for 93120 Formaldehyde
NOTE - This machine should be oiled upon setup at it's new location immediately before being operated and oiled daily afterwards. This is extremely important for proper maintenance of this commercial quality machine.We also offer oil - please ask.NOTE - WE CAN INSTALL AN AUTO OILER IF NEEDED - JUST ASK!
Know What You are Buying - We take the time to post actual pictures of the unit you are buying
- We also take the time to thoroughly test the units we are selling
- Buy with CONFIDENCE from a reputable seller with 20 Years experience
WARRANTY - BUYER will enjoy a full performance warranty for 180 days. We will replace defective components or refund / exchange the machine if it fails to operate as we have described for a period of 30 days in accordance with our terms in our guarantees section below.
About the GBC 6060X
The GBC 6060X paper shredder is a medium-duty, cross cut production shredder that cuts up to 26 sheets at once into 3/16" x 2 3/8" shreds. This model offers greater security and bulk reduction than the strip cut 6120S, but has many of its same capabilities. The funneled 16" wide throat allows for all types of shredding operations from standard office documents up to EDP size/computer paper. It is equipped with GBCs Jam-Stopper electronics: bag-full sensor shuts machine off before jams, automatic stop eliminates motor wear and tear, and indicator light informs the operator when waste bin is full. The automatic shut off feature is triggered once the cabinet door is opened. The extra large, 41 gallon waste bin eliminates the need for frequent bag changes. GBC Shredmaster production shredders are built for years of reliable service and are backed by a complete three year manufacturers warranty, with lifetime on cutting heads.
In Bin - "JOG" Pedal
In-cabinet "Bin Jog" Foot Pedal Settles and Compacts Shreds - just press the pedal (Picture #7 - under the bin - when you push the bin back in, it shows) and it will 'settle' the bin to add even more capacity!
Features
16" Throat
3/16" x 2 3/8" Shred Size
22-26 Sheet Capcaity
30 Feet Per Minute Speed
Shreds Staples and Paper Clips
1 4/5 HP
Continuous Duty Motor
41 Gallon Bin
In-cabinet "Bin Jog" Foot Pedal Settles and Compacts Shreds
37.5" x 25" x 23"
CALL US with questions - Our business line is 410-374-1261
Thanks for Looking!