- Security
- Other
- Video
- PAPER SHREDDERS
- Shredder Oil
- Parts
- Dell Parts
- Gateway
- Panasonic Parts
- Ricoh Parts
- Samsung Parts
- Kyocera Mita Parts
- Commercial Printing Equipment
- SERVER Parts
- IBM Parts
- Epson Parts
- Tally Parts
- Apple Parts
- Intermec Parts
- Lantronix Parts
- Primera/Bravo II
- Datamax
- Electrical
- Contex Parts
- Microboards Parts
- Fuji Parts
- MagiCard Parts
- Electrograph Parts
- Formax Parts
- Memorex Parts
- Primera Bravo Pro
- Fargo Parts
- Fujitsu Parts
- Cisco Parts
- Toshiba Parts
- HP Parts
- Lexmark Parts
- XEROX Parts
- Kodak Parts
- Konica Minolta parts
- Okidata parts
- Canon Parts
- Brother Parts
- Paper Trays
- Sharp Parts
- NEC Parts
- Printers
- Copiers
- GEN OFFICE EQMT
- Fax
- Testing Equipment
- Peripherals
- Paper Folders
- Docking Stations
- Keyboards
- Mice
- Mouse Trak Trackballs
- Card Reader
- Joystick
- Disc Drives
- Wedge Scanner
- Video/Audio/Communications
- Dictation
- Battery Support
- DISC DUPLICATORS & PUBLISHERS
- GPS Equipment
- Cell Phone Accessories
- Camera Equipment
- KVM Switches
- Other Office Equipment
- Calculator
- Media Converters
- eReader
- Power Adapters
- Power Supply
- Modems
- Networking
- Computer / CPU
- Medical Equipment
- Commercial Kitchen
Bio-Rad CHEF MAPPER XA Power Module
Bio-Rad CHEF PULSED FIELD ELECTROPHORESIS SYSTEM
GENUINE OEM Bio-Rad Equipment
Serial 801BR-2217 / System 1703670
Analyzer System F
TESTED Unit - See Description Below !
Bio-Rad CHEF PULSED FIELD ELECTROPHORESIS SYSTEM
GENUINE OEM Bio-Rad Equipment
Serial 801BR-2217 / System 1703670
Analyzer System F
TESTED Unit - See Description Below !
Other System Components Available As Well
Get A GOOD One - at GetThatPart !
Get A GOOD One - at GetThatPart !
About This Item
Actual item from lot is shown. Only what is shown is included. TESTED Unit - pulled from working system and cleaned, inspected, and recertified for dependable daily use by our tech team. Unit was tested prior to parts harvest and determined to be working perfectly. Guaranteed functional for a period of 30 days.
This component is part of a larger system. We are offering this component individually for those who may need to replace only one component, but we do have the entire system as described below. See description below for specific testing, serial numbers, and other component specific information. Please ask us about the other compoents if you need them as well.
NOTE - The Full System Manual is attached for your convenience - see 'attachments'
Know What You are Buying
- We typically take the time to post actual pictures of the unit you are buying
- We also typically take the time to thoroughly test the units we are selling
- Buy with CONFIDENCE from a reputable seller with 20 Years experience
DESCRIPTION
Component of the system being offered in this listing is - Bio-Rad Chef Mapper XA / Power Module with Analyzer System F. System MPN is 1703670 and the serial on this component is 801BR-2217
In testing, this unit powers to paused status, all screens respond from there as anticipated. All components power and run as expected. The current parameters setup is shown but it can be programmed as you need.
System Description (for which this component is intended)
Bio-Rad CHEF MAPPER XA PULSED FIELD ELECTRPHORESIS SYSTEM
The CHEF Mapper system is based on two leading technologies, CHEF (clamped homogeneous electric fields)31 and PACE (programmed autonomously controlled electrodes).32 The system provides highly uniform, or homogeneous, electric fields within the gel, using an array of 24 electrodes, some of which are clamped, or held to intermediate potentials to eliminate lane distortion. Thus, lanes are straight. The system maintains uniform fields using patented Dynamic Regulation (US patent number 4,878,008). The electrodes sense changes in buffer conductivity due to buffer breakdown, buffer type, gel thickness, pH fluctuations, and temperature, and potentials are readjusted immediately to maintain uniform fields, thus insuring high resolution. In PACE, each electrode s voltage is controlled independently by firmware. Whereas other CHEF systems are limited to two vectors and a 120° pulse angle, the CHEF Mapper system allows up to 15 vectors per block with a total of 8 blocks, each vector with its own voltage, angle, and duration. Thus, the CHEF Mapper system may simulate virtually any pulsed field technique using homogeneous fields, including FIGE, CHEF, and RFGE. Advanced programmers may simulate OFAGE and other non-homogeneous field methods using a computer.
The CHEF Mapper system offers innovations beyond original PACE. For example, nonlinear switch time ramping allows linear separations for many sizes of DNA. Secondary pulses, or interrupts, unhinge DNAs from obstructions and permit faster separations. The CHEF Mapper system contains 5 years of protocols embedded on a microchip, eliminating trial and error in setting parameters. Given the size range you expect to separate, the embedded auto algorithm interrelates the sizes with 10 other variables, and provides the preferred operating conditions. Common gel and buffer conditions, and run temperature of 14 °C, are assumed. An Interactive Program Disc provides an extended version of the algorithm. This PC program allows you to vary gel, buffer, and temperature parameters and print out optimal conditions.
We offer a Bio-Rad Chef Mapper in good physical condition. The unit powers on fine. Compressor Kicks on and cools to temp.
The System will include the following components:
- Bio-Rad CHEF Mapper Power Module
- Bio-Rad Electrophoresis Cell with cable and lead
- Bio-Rad Chiller Module
- Bio-Rad Variable Speed Pump
- Rom 2.1
This complete system sells for $22,000
CALL US with questions - Our business line is 410-374-1261
Thanks for looking!
- ManufacturerBio-Rad
- Product Added Date8/31/2019
- Inventory Added Date8/31/2019
- Condition CodeRefurbished
- Bin LocationMH-RA1
- P/N1703670
- BB Condition CodeUsed
Power Module | |
Dimensions (W x D x H) | 55.9 x 34.5 x 30 cm |
Construction | Aluminum chassis |
Weight | 16 kg (35.3 lb) |
Power supply | 350 V maximum, to allow maximum gradient of 9 V/cm, continuously adjustable; built in |
Maximum current | 0.5 A |
Allowable voltage gradients | 0.6–9 V/cm, in 0.1 V/cm increments |
Battery back-up | All parameters in memory, up to 3 hr of interruption |
Delayed start | Up to 72 hr |
Electrode potentials | Dynamically regulated (feedback adjustment) +/- 0.5% F.S. |
Program storage | 20 average size protocols |
Display | Fluorescent, 2 lines x 40 characters per line, alphanumeric |
Environmental | |
Operating temperature | 50°F (10°C) to 90°F (32°C); 30–80% humidity |
Storage temperature | 32°F (0°C) to 140°F (60°C); 10–90% humidity |
Switching Functions | |
Switching range | 50 ms to 18 hr |
Switch angle variable | 0–360° (all electronic switching) in 0.5° increments |
Multistate vector switching | Up to 15 vectors per pulse cycle, each definable by angle, voltage, and duration |
Switch time ramps | Linear, concave, or convex using hyperbolic function |
Secondary pulses | Defined by voltage, frequency, angle, and duration |
Field inversion (FIGE) | Available with asymmetric forward, reverse voltages |
Maximum program blocks | 8, with automatic execution |
Maximum run time | 999 hr per block |
Fuses | 3 A Slow-Blow; two each for AC line input |
Electrophoresis Cell | |
Dimensions (W x D x H) | 44.2 x 50.3 x 11.4 cm, horizontal format |
Construction | Cover: vacuum-formed polycarbonate, base: injection-molded polycarbonate |
Lid | Safety interlocked |
Weight | 10.2 kg (22.5 lb) |
Electrodes | 24, platinum (0.02" diameter) |
Temperature monitoring | Via precision temperature probe mounted in base of cell |
Accessories Included | |
Variable speed oscillating pump | 120 V, ground isolated; flow rate 1 liter/min, typical |
Casting stand | 14 x 13 cm |
Comb | 15-well comb and comb holder |
Tygon tubing | 365 cm |
Disposable sample plug mold | 50 slot |
Yeast DNA standard | S. cerevisiae YNN295 |
Chromosomal grade agarose | 5 g |
Pulsed field Certified™ agarose | 5 g |
Leveling bubble | 1 |
Cooling Module (optional) | |
Weight | 14 kg (30.9 lb) |
Construction | Aluminum |
Dimensions (W x L x H) | 23 x 42 x 24 cm |
Cooling capacity | 75 W of input power at 14°C |
Operating range | 5–25°C |
Total system weight | 41.7 kg (91.9 lb) |