About This Item
Actual item is shown. Only what is shown is included. New unit, but not in OEM box. This machine was sold new, delivered, setup and never used. This machine was new only a few years ago. Pictures are of actual unit, so please review pictures for detail on condition and interfaces. The machine was operated in all modes and found to grind paper per specifications. The result is shown in the pictures. This unit is designed for commercial duty applications. Unit has some case imperfections, as shown in the actual pictures that are attached, but please bear in mind that these imperfections do not affect operational performance. We guarantee this machine to perform as we have described upon receipt. This is the best selling "Classic" machine, no longer made but fully supported. We have all parts for this model available in our own parts room and HSM made this machine for about 25 years - perfect blend of rugged simplicity. Rare opportunity to buy a new one. Even includes new manual and bags originally delivered with unit.
Notes from our Tech when ReConditioned
We wanted to be careful in representing this as new, so we did a thorough inspection. This is an advanced German designed and made Level 3 machine. The cutter block assembly in this machine will pass a full performance audit for Level 3. The shredder cutter block was examined in our factory dealer shop and certified to meet a security audit - meaning there are zero broken teeth or strippers and 100% of all paper passed through will comply with the NSA 02-01 spec for Level 3. We ran several hundred pages through it after going through our shop, with no issues whatsoever. The machine was load tested and found to pass the spec 27 sheets per pass - constantly (oem new spec). The machine was fully cleaned and lubed from factory and never had paper through it. All drivetrain components checked to be certain. The mill and all components performing per oem specification. The case will show some blemishes consistent with moving the machine but has no use wear.
S/N - 330000142
M/D - 225.2 / 1343.143
Cut - 3.9 mm x 40.0 mm
HP - 2.00
ABOUT PHOENIX CONSULTING
Phoenix Consultings' GetThatPart online sales division has been manufacturing shredders for over a decade. Our service and support team is familiar with all major makes of high quality industrial shredders. Our tech support staff refurbishes these machines in our own shop, replacing all major components and controls. We are professionals and can pass professional service and support onto our valued customers. When you are considering your next shredder purchase, give us an opportunity to find that machine that is right for your needs.
Phoenix Consulting has been in the Shredder business long enough that we designed our own brand of shredder oil. Our oil is high quality and is identical in formulation to Fellowes brand Shredder Oil. Buy direct from the people who package the oil instead of two or three layers in between. We pass the savings directly on to you, where you get the highest quality at the lowest cost.
Know What You are Buying
- We typically take the time to post actual pictures of the unit you are buying
- We also typically take the time to thoroughly test the units we are selling
- Buy with CONFIDENCE from a reputable seller with 20 Years experience
Manufacturer - HSM
Part # 1343
Manufactured In Germany
Cut Type cross-cut
Security Level 3
Shred Width 1/8
Shred Length 1 1/2"
Sheet Capacity (maximum) 27
Bin Capacity (gal) 31.7
Throat Size 11.8
Can Shred: Paper, CDs, Paper Clips, Staples, Credit Cards, Floppy Disks
Shred Container Type Wire Frame
Horse Power 1.88
Continuous Motor Yes
Auto Oiler Optional
Voltage 100 - 120v (Standard)
Noise Level (db) 56
WARRANTY - BUYER will enjoy a full performance warranty for 1 Year. We will replace defective components or refund / exchange the machine if it fails to operate as we have described for a period of 1 Year in accordance with our terms in our guarantees section below.
NEW Manufacturer Warranty (still includes Cutting Roller Warranty from new) :
Parts and labor to repair any failure caused by defect is limited to three (3) years from date of invoice. Strip and Cross Cut Cutting Rollers are warranted to be free of manufacturer defects for the life of the shredder from the date of invoice.
CALL US with questions - Our business line is 410-374-1261
Thanks for looking!