Previous image
Extron MTP T 15HD A MTP Twisted Pair VGA Audio Transmitter w/ Pre Peak
Next image
Zoom image

Extron MTP T 15HD A MTP Twisted Pair VGA Audio Transmitter w/ Pre Peak


Not rated yet
In stock (1 item available)
Extron MTP AV Transmitter
SPARES - REPAIRS - UPGRADES

GENUINE OEM Extron
Model MTP T 15HD A
Includes OEM Extron Power Supply

NO Better & Best Supported - Get Extron !

 Get A GOOD One !
Save $$$ right here at GetThatPart

 
CALL US with questions - Our business line is 410-374-1261
  • $29.00
Qty:  
  • Weight
    3.0000 lbs
  • SKU
    SKU100728

About This Item
Actual item from lot is shown. Only what is shown is included. TESTED Unit - pulled from working system and cleaned, inspected, and recertified for dependable daily use by our tech team. Unit was tested prior to parts harvest and determined to be working perfectly. See pictures - also includes oem Extrom power supply. Guaranteed functional for a period of 30 days.

Know What You are Buying

  • We typically take the time to post actual pictures of the unit you are buying
  • We also typically take the time to thoroughly test the units we are selling
  • Buy with CONFIDENCE from a reputable seller with 20 Years experience

DESCRIPTION

Manufacturer - Extron
Part # MTP T 15HD A / MTP-T-15HD-A  / MTPT15HDA
 
The Extron MTP T 15HD A Twisted Pair Transmitter with EDID Minder® sends high resolution video and audio signals to a compatible MTP receiver. The MTP T 15HD A  features EDID Minder, which automatically manages EDID communication to ensure that the source powers up properly and reliably outputs content for display. It accepts computer-video, HD and standard definition video, and audio inputs on female 15-pin HD connectors and 3.5 mm stereo audio jacks. The video and summed mono audio signals are transmitted over a single CAT 5-type cable to a compatible twisted pair receiver. The MTP T 15HD A also features a local monitor output for systems that require a local display.
 
Key Features
  • Transmits high resolution video and summed mono audio signals over a single CAT 5-type cable
  • EDID Minder® automatically manages EDID communication between connected devices
  • Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
  • Compatible with HDTV component video, bi-level or tri-level sync
  • Pre-peaking circuit for optimizing video signal on long cable runs
  • Rack-mountable, 1U, quarter rack width metal enclosure
MTP 15HD A Series Combo
 
Video
   Gain  Unity
   Number/signal type  1 set of proprietary analog signals
   Connectors   
      MTP R 15HD RSA D  1 female RJ-45 on a pigtail
      All other models  1 female RJ-45
 
Video input and loop through — transmitters
   Number/signal type   
      MTP T 15HD A, MTP C7 T 15HD A  1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
      MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM  1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
   Connectors   
      MTP T 15HD A, MTP C7 T 15HD A  2 female 15-pin HD
      All other transmitters  1 female 15-pin HD
   Nominal level  1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.3 V to 1.45 Vp-p
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 130 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-30 dB @ 5 MHz
   DC offset (max. allowable)  250 mV
 
Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D, MTP 1500RL 15HD A SEQ. MTP C7 RL 15HD A)
   Number/signal type   
      MTP R 15HD RSA D  1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
      All other receivers  1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
   Connectors   
      MTP R 15HD RSA D  1 female 15-pin HD
      All other receivers  1 female RJ-45
1 female 15-pin HD
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.3 V to 1.45 Vp-p
   Impedance  75 ohms
   Return loss  <-30 dB @ 5 MHz
   DC offset   
      MTP R 15HD RSA D  <±20 mV with input at 0 offset
      All other receivers  <±35 mV with input at 0 offset
   Skew compensation  62 ns
   Maximum resolution   
      MTP 1500RL 15HD A SEQ  Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
      All other models  Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
    NOTE     See the user guide for the maximum distances recommended for specific resolutions.
 
Sync
   Input type (transmitters)  RGBHV, RGBS, RGsB, RsGsBs
   Output type (receivers)  RGBHV, RGBS, RGsB, RsGsBs
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level (transmitter)  3.5 V to 5.5 Vp-p, unterminated
   Output level (receivers)  4.0 V to 5.0 Vp-p, unterminated
   Input impedance (transmitter)  573 ohms ±5%
   Output impedance (receivers)   
      MTP C7 15HD models  92 ohms ±8% (25 mA)
      All other models  110 ohms
   Polarity   
      Transmitter  Positive or negative (follows input polarity)
      Receivers  Positive or negative (switch-selectable)
 
Audio — all models
   Number/signal type  1 set of proprietary analog signals
   Connectors  1 female RJ-45
   Gain  Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, ±1 dB
   THD + Noise  0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >70 dB at maximum output (unweighted)
   Stereo channel separation  >60 dB @ 1 kHz
   CMRR  >43 dB @ 20 Hz to 20 kHz
 
Audio input — transmitters
   Number/signal type  1 stereo, unbalanced
   Connectors  (1) 3.5 mm mini stereo jack
   Impedance  >10k ohms, unbalanced
   Nominal level  +4 dBu (1.23 Vrms), -10 dBV
(316 mVrms)
   Maximum level   
      MTP C7 15HD models  +12 dBu, (unbalanced) at 1%THD+N
      All other models  +18 dBu, (unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output
   Number/signal type  1 stereo, balanced/unbalanced
   Connectors  (1) 3.5 mm direct insertion captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±1 dB channel to channel
   Maximum level (Hi-Z)  >+23 dBu, balanced or unbalanced at 1% THD+N
   Maximum level (600 ohm)  >+17 dBm, balanced or unbalanced at 1% THD+N
 
Audio output — receivers
   Number/signal type   
      MTP R 15HD RSA D  1 mono, balanced/unbalanced
      All other receivers  2 mono, balanced/unbalanced
   Connectors   
      MTP R 15HD RSA D  (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
      All other receivers  (1) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±1 dB channel to channel
   Nominal level  +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level   
      MTP R 15HD RSA D  14 dBm, unbalanced at 1% THD+N
      All other receivers  +18 dBu, unbalanced at 1% THD+N
 
Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only
   Serial control port input/output  1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input  RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
   Baud rates  Up to 38400 bps at up to 600' (182.9 m)  (Higher data rates and distances are possible.  Performance varies based on baud rate and cable length.)
   Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration  Captive screw connector: 1 = Tx, 2 = Rx,
3 = GND
 
General
   Recommended cable type   
      Models other than C7 models  CAT 5/5e/6 (shielded or unshielded)
   Required cable type   
      MTP C7 15HD models  Extron STP201 or CAT 7
   Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power input requirements   
      MTP 1500RL 15HD A SEQ  12 VDC, 1 A
      All other models  12 VDC, 0.5 A
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling   
      MTP 1500RL 15HD A SEQ  Convection, vents sides to top
      All other models  Convection, no vents
   Mounting   
      Rack mount   
         MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ, MTP 1500RL 15HD A SEQ  Yes, with optional 1U rack shelf
      Furniture or wall mount   
         MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ  Yes, with optional under-desk mounting kit
         MTP T 15HD A AAP  Yes, with optional AAP mounting faceplates that have double space high AAP opening
         MTP T 15HD A D, MTP R 15HD RSA D  Yes, in a decorator-style opening with a standard electrical wall box or decorator-style size mud ring
         MTP T 15HD A WM  Yes, in a 1-gang opening
      Wall mount   
         MTP 1500RL 15HD models  Yes, with optional wall mounting kit
      Pole mount   
         MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ  Yes, with optional pole mounting kit
   Enclosure type  Metal
   Enclosure dimensions   
      MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ  1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
      MTP C7 15HD models  1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors and knobs.)
      MTP 1500RL 15HD SEQ models  1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
      Faceplates   
         MTP T 15HD A AAP  1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
         MTP T 15HD A D, MTP R 15HD RSA D  2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang, 4.4" H x 2.7" W
decorator-style wallplate. Depth excludes connectors.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
         MTP T 15HD A WM  4.5" H x 2.8" W x 0.1" D
(11.4 cm H x 7.1 cm W x 0.3 cm D)
(1 gang)
      Device   
         MTP R 15HD RSA D  2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
         Other AAP, D, and WM models  2.7" H x 1.4" W x 1.4" D
(6.9 cm H x 3.6 cm W x 3.6 cm D)
(Depth excludes connectors.)
   Product weight   
      MTP 1500RL 15HD A SEQ  1 lb (0.5 kg)
      All other models  0.4 lbs (0.2 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty  3 years parts and labor
   Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(CMS-041917-D18)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1282-01 2.88" (7.3 cm) 7.31" (18.6 cm) 10.44" (26.5 cm) 1.82 lbs (0.83 kg)

 

 
CALL US with questions - Our business line is 410-374-1261

 

Thanks for looking!
  • Manufacturer
    EXTRON
  • Product Added Date
    5/14/2019
  • Inventory Added Date
    5/14/2019
  • Condition Code
    Refubished
  • Bin Location
    SRP18
  • P/N
    MTP T 15HD A
  • BB Condition Code
    Ref
  • PL Inventory
    1
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment