About This Item
Actual item is shown. Only what is shown is included. Used unit, but reconditioned by our team to and recertified to perform to oem manufactuer spec, in great condition and ready to work. Please understand the machine is being reconditioned by an authorized HSM shredder dealer, not machine-flippers.Pictures are of actual unit, so please review pictures for detail on condition and interfaces. Has AUTO OILER OPTION - senses load and delivers oil to demand (shown). Also has ability to adjust rate.
The machine was operated in all modes and also found to grind paper per specifications. The result is shown in the pictures. This unit is designed for commercial duty applications. We guarantee this machine to perform as we have described upon receipt.Notes from our Tech when ReConditioned
This is a very heavy duty level P-7 (highest security) shredder with high volume capabilities. Shreds perfectly - see the result. We ran several hundred pages through it after going through our shop, with no issues whatsoever. The sensors were performance tested and all work as intended. The machine was fully cleaned and lubed. All drivetrain components checked for wear. The mill and all components performing per oem specification. The case will show some blemishes consistent with use of a machine of this type and we have pictured those blemishes.Note this model machine is currently offered new elsewhere for $5995.Serial No - 6253970
Assy - 39/2009ID No - 10514101
Shred Size - 0.8 x 5 mm
NOTE - This machine should be oiled upon setup at it's new location immediately before being operated and oiled daily afterwards. This is extremely important for proper maintenance of this commercial quality machine.
NOTE - WE CAN ADD OIL TO ORDER IF NEEDED - JUST ASK!
Know What You are Buying
- We take the time to post actual pictures of the unit you are buying
- We also take the time to thoroughly test the units we are selling
- Buy with CONFIDENCE from a reputable seller with 20 Years experience
WARRANTY - BUYER will enjoy a full performance warranty for 180 days. We will replace defective components or refund / exchange the machine if it fails to operate as we have described for a period of 180 days in accordance with our terms in our guarantees section below.
About the SEM 266/4 MicroCut Shredder
Model 266/4 meets DIN 32757 and DIN 66399 Level 6 / P-7 shredder standards and shreds paper to a max size of .03' x .19". Rated at 28 reams per hour at 10 sheets per pass. Equipped with an automatic oiler for maximum performance and extended service life.
SEM offers the widest variety of NSA/CSS 02-01 (EPL) evaluated and listed high security paper shredders in the market. All units include standard safety features making them popular in offices of all sizes. All units have built in safety features and automatic energy saving modes. The standard "ESM" mode adjusts the unit to ZERO power consumption after 30 minutes of non use.
* Requires 20 amp receptacle and dedicated line.
- Automatic start stop.
- Automatic reverse function due to paper jam.
- Casters for mobility.
- Bag full indicator and door open stop function.
- 1 Gallon Oil Reservoir.
Specifications for SEM 266/4 High Security NSA / CSS Certified Paper Shredder
||115 v (20 amp outlet)
|Max Speed (ft/min):
||22 to 30
|Sheet Capacity (20lb - 16lb):
|Shred Size (in.):
||.03' x .19"
|Throat Opening (in.):
|Motor Duty Cycle:
|Bag Full Auto Off:
|Bag Full Indicator:
|Accepts CDs/Credit Cards:
|Accepts Staples/Paper Clips:
||40.25" x 21.5" x 23.25" (HxWxD)
CALL US with questions - Our business line is 410-374-1261
Thanks for Looking!