About This Item
Actual item is shown. Only what is shown is included. Used unit reconditioned thoroughly in our factory shop and performing to new oem specs. Pictures are of actual unit, so please review pictures for detail on condition and interfaces. The machine was operated in all modes and found to grind paper per specifications. The result is shown in the pictures. This unit is designed for commercial duty applications. We guarantee this machine to perform as we have described upon receipt.
Notes from our Tech when ReConditioned
This is an advanced German designed and made microshred machine. The cutter block assembly in this machine will pass a full performance audit. The shredder cutter block was examined in our factory dealer shop and certified to meet a security audit - meaning there are zero broken teeth or strippers and 100% of all paper passed through will comply with the NSA 02-01 spec for Level P-7. It will be impossible for any shreds to be reconstructed. We ran several hundred pages through it after going through our shop, with no issues whatsoever. The machine was load tested and found to pass the spec 10 sheets per pass - constantly (better than spec). The sensors were performance tested and all work as intended. The machine was fully cleaned and lubed. All drivetrain components checked for wear. The mill and all components performing per oem specification. The case will show some blemishes consistent with use of a machine of this type and we have pictured those blemishes.
Serial No - 260083260
Machine ID - 1458.323
MPN -225.2 HS Lvl6
Level 6 MicroShredder
This is one of the highest throughput Level 6 (guaranteed audible NSA 0201 machine) machines in it's class (2.0 HP). If you have security requirements - this machine is a set it and forget it solution. It will not run without oil - no one can forget. Oil protects the microcut mill and ensures best performance from your machine.
NSA One Hour Durability Rating Certification - Rated by the NSA at 11 reams / 5 sheets per pass
COMPANY BROCHURE (PDF) - HERE
Know What You are Buying
- We typically take the time to post actual pictures of the unit you are buying
- We also typically take the time to thoroughly test the units we are selling
- Buy with CONFIDENCE from a reputable seller with 20 Years experience
WARRANTY - BUYER will enjoy a full performance warranty for 180 days. We will replace defective components or refund / exchange the machine if it fails to operate as we have described for a period of 180 days in accordance with our terms in our guarantees section below.
Shredder Features:
- HSM 225.2 Level 6 High Security Paper Shredder
- Auto Start/Stop via electronic eye
- Standby operation with LED
- Auto stop when container is full and door is open
- New auto stop with LED plus auto reverse in case of a paper jam
- Specially hardened steel cutters are unaffected by standard paperclips and staples
- Especially convenient pull-out system for removing the integrated, sturdy, reusable collecting bag
- Powerful, specially adjusted motor for longer periods of use -with thermal protection for high performance
- The tried and tested closed tooth wheel drive prevents penetration of dirt and slows wear, thus increasing the service life
- Enclosed housing protects against the spread of paper dust and provides for "whisper quiet" shredding
- Mobile on castors
- High Security machines cannot shred CD's, floppy disks, credit cards, paperclips, staples or plastic materials
Shredder Specifications:
HSM 225.2 Level 6 High Security Paper Shredder |
| Shred Size | 1/32" x 3/16" |
| Sheet Capacity | 10 - 12 sheets |
| Shredder Speed | 27 feet per minute |
| Shred Type | Micro Cut |
| Security Level | 6 (High) |
| Government Rating | DoD and NSA/CSI 02-01 approved |
| Throat Size | 12" |
| Waste Container Volume | 26 gallons |
| Shredder Dimensions | 19.75"w x 35.25"h x 16.5"d |
| Horse Power | 1.88 |
| Voltage | 115 |
| Shipping Weight | 105 lbs |
CALL US with questions - Our business line is 410-374-1261
Thanks for looking!
