HSM 390.3 Cross-Cut 2HP Commercial German Departmental Paper Shredder

Not rated yet
0
  • $895.00
Out of stock
PERFECT WORKGROUP BUSINESS SHREDDER
Dealer Warranty of 6 Months - SAVE v. NEW at $3595

HSM 390.3 / 390.3cc Cross-Cut
High Volume Paper Shredder

Check underthehood - actual pics attached !
Awesome never fail drivetrain / gears
(No one else shows you "under the hood" pictures)


UNMATCHED German Made HSM Machine
16" Capacity - Up to 22 sheets at a time !!
Level 3 Security / 1/8" x 1.5" cut

 

Up to 50,000 Sheets / Hour Speed - Fast !

HEAVY 2.00 HP Shredding Engine - DURABLE / RELIABLE

Reconditioned by an AUTHORIZED HSM Dealer
Buy from experts who can answer all your questions - not a sales person
GUARANTEE - EXPERTISE - SUPPORT & SUPPLIES (oil, too)

 

CALL US with questions - Our business line is 410-374-1261

Thanks for Looking!

 
About This Item
Actual item is shown. Only what is shown is included. Used unit reconditioned thoroughly in our factory shop and performing to new oem specs. Looks NEW internally (see pictures). Pictures are of actual unit, so please review pictures for detail on condition and interfaces. The machine was operated in all modes and found to grind paper per specifications. The result is shown in the pictures. This unit is designed for commercial duty applications - similar to the very popular 390.2 - We guarantee this machine to perform as we have described upon receipt.

Notes from our Tech when ReConditioned
This is an advanced German designed and made crosscut machine. The shredder cutter block was examined in our factory dealer shop and certified to meet oem new specification - meaning there are zero broken teeth or strippers and 100% of all paper passed through will comply with the spec for Level 3. We ran several hundred pages through it after going through our shop, with no issues whatsoever. The machine was load tested and found to pass the spec 22 sheets per pass - constantly. NOTE - we chose to replace the 1st stage gear with a new gear as we felt it had some wear and our process demands 100% technical compability with new condition. The gearbox was re-lubed and sealed (see pictures). The sensors were performance tested and all work as intended. Our tech replaced casters, adjusted cutter block, sensors and tested to assure dependable long term use. The machine was fully cleaned and lubed. All drivetrain components checked for wear. The mill and all components performing per oem specification. The case will show some blemishes consistent with use of a machine of this type and we have pictured those blemishes.

Serial No - 480045975
Machne ID - 1368.143
MPN -390.3

NOTE - This machine should be oiled upon setup at it's new location immediately before being operated and oiled daily afterwards. This is extremely important for proper maintenance of this commercial quality machine.We also offer oil - please ask.

Know What You are Buying
  • We take the time to post actual pictures of the unit you are buying
  • We also take the time to thoroughly test the units we are selling
  • Buy with CONFIDENCE from a reputable seller with 20 Years experience
 
WARRANTY - BUYER will enjoy a full performance warranty for 180 days. We will replace defective components or refund / exchange the machine if it fails to operate as we have described for a period of 180 days in accordance with our terms in our guarantees section below.

Specifications
Product Length - 18.75 in.
Product Width - 23.25 in.
Product Height - 35.37 in.
Product Weight - 190.00 lbs.
Shred Capacity - 25-27 sheets
Shred Size Length - 1.5 in.
Shred Size Width - .125 in.
Throat Opening - 16 in.
Speed - 31 ft./min.
Horsepower - 2.00 hp
Waste Bin Volume - 41 gal.
Voltage - 115 Volt, 60 Cycle volts
Security Level - 3


Things to consider........

To keep top secret information secure, many offices rely on medium security shredders. One excellent choice currently on the market is the HSM 390.3 Level 3 Shredder. This device dices complete documents into thousands of tiny pieces, resulting in an approved product. Featuring automated use and powerful steel blades, this machine quickly obliterates any sensitive information. Here is a closer look at the strengths and weaknesses of the HSM 390.3 Level 3 Paper Shredder.

Strengths:

  • Use of this shredder is easy even for inexperienced users. Once switched on, the engine sits in standby mode, ready for shredding, without consuming energy. A photoelectric eye senses pages in the feed and automatically starts and stops the blades to shred as needed. In the event of a paper jam, the motor automatically stops and then reverses the blades to release overfed paper. The auto stop also activates when the shred bag is full or the cabinet door is open.

  • Thermal protection from overheating allows the motor to be used for extended periods of time without needing to cool down. This shredder is designed with a closed gear transmission for high performance. It cuts down on dirt and wear while increasing the service life.

  • The 16 inch entry slot handles 25-27 sheets of letter and legal size documents as well as wide computer printouts. The pages are shred into tiny particles as fast as 31 feet per minute. Paper remnants fall into a voluminous 41 gallon shred bag. A wide opening cabinet houses the reusable container and provides a pull-out wire frame for easier emptying.

  • Secure, cross cutting blades swiftly convert full size paper into thousands of micro pieces, only 3.9mm by 40mm in size. This provides medium security rating available, level three. This level is DOD and NSA approved for medium security document destruction.

  • The solid steel cutting shafts carry a one year warranty along with parts and labor on the rest of the device.

Weaknesses:

  • Weighing over 150 pounds, this is a heavy piece of office equipment. Even so, there are casters on the bottom for easier portability if you need to relocate it. We don't think weight will present a big problem for most users.

  • The blades can only handle up to 25-27 sheets at once. Also typical of medium security shredders, the high capacity is not offset by slower shred speed of 31 feet per minute.


CALL US with questions - Our business line is 410-374-1261

Thanks for looking!
    • SKU
      SKU103610
    • Weight
      275.0000 lbs
    • Dimensions (L x W x H)
      40 x 30 x 40 in
  • Manufacturer
    HSM
  • Product Added Date
    9/8/2012
  • Inventory Subtract Date
    5/10/2022
  • Inventory Added Date
    3/6/2022
  • Condition Code
    Refurbished
  • Bin Location
    E11
  • P/N
    390.3
  • BB Condition Code
    Ref
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review
ABOUT PHOENIX CONSULTING
Phoenix Consultings' GetThatPart online sales division has been manufacturing shredders for over a decade. Our service and support team is familiar with all major makes of high quality industrial shredders. Our tech support staff refurbishes these machines in our own shop, replacing all major components and controls. We are professionals and can pass professional service and support onto our valued customers. When you are considering your next shredder purchase, give us an opportunity to find that machine that is right for your needs.

Shredder Oil
Phoenix Consulting has been in the Shredder business long enough that we designed our own brand of shredder oil. Our oil is high quality and is identical in formulation to Fellowes brand Shredder Oil. Buy direct from the people who package the oil instead of two or three layers in between. We pass the savings directly on to you, where you get the highest quality at the lowest cost.
 

Timeless quality. Unmatched design. This document shredder is the perfect solution for delivering the peace of mind you want…and the maximum performance you deserve. Ideal for IT departments and office floors; capable of decimating entire computer listings.

  • Optimized cutting device technology tears through 25-27 sheets of paper, creating 517 cross-cut / confetti-cut particles per page
  • Also shreds staples, paper clips, credit/store cards, CDs/DVDs and floppy disks
  • Anti-Jam Technology prevents jams when document shredder is overloaded
  • Continuous Duty Operation ensures continual shredding with no down time
  • Lifetime warranty on cutting cylinder
  • Made in Germany
  • Solid Steel Cutting Cylinder made from 100% solid steel for high cutting capacities
  • Wear-resistant solid steel cutting rollers ensure long life
  • Automatic start/stop and on/off rocker switch with integrated reversing function
  • Bin-full/bin open stops
  • Storage space for paper stacks
  • 39-gallon bin

*White Glove service available

**External Oiler option available

Footer navigation