Fujitsu M3096G Tabloid High Speed SCSI Document Scanner

Not rated yet
0
  • $69.00
Out of stock

M3096G

Fujitsu M3096G TABLOID HIGH SPEED SCSI DOCUMENT SCANNER

About This Item
Acquired from the US Government. Actual item is shown. Only what is shown is included. Used unit, but is very clean and shows little use. Does not include the ADF exit tray - sorry, none with the unit. Our tech did a thorough checkout on this machine and the results are posted below in the testing section. Machine is GUARANTEED Functional.

TESTING
This unit was thoroughly processed for this auction to verify condition. We found the unit to power, initialize and return to a ready condition as shown in the pictures. The scanbar lit and moved to position upon powering. All diagnostics procedures available from the control panel were performed successfully. We did not interface test the unit as it would need to be setup on a network to do so. Drivers & Documentation from Fujitsu - HERE

Fujitsu M3096G Summary

Fujitsu presents an excellent quality, high speed image scanner which can handle up to double-letter size paper: Compact and inexpensive, it is an ideal input device for electronic filing systems, facsimiles, optical character readers (OCR), computer aided design (CAD) systems, and desk-top publishing systems (DTP.

Fast Scanning

At a 200 pixels per inch resolution, the Fujitsu image scanners scan a letter-size (8.5 in. x 11 in. or 216 mm x 279 mm) or A4 (8.3 in. x 11.7 in. or 210 mm x 297 mm) document in 2.2 to 2.3 seconds.

Multiple resolutions

The Fujitsu image scanners offer multiple F IV standard resolutions of 200, 240, 300, and 400 pixels per inch, allowing you to choose the level of quality and speed.

Automatic document feeding

The standard flat bed permits the scanning of a single page (including a page of a book). The M3096G has an automatic document feeder that can accommodate up to 50 pages.

Excellent quality scanning

The Fujitsu image scanners inherit the high quality image scanning technology of Fujitsu's advanced OCRs and produce excellent electronic images from documents. The recognise 256 steps of the grey scale and have two optional boards: A dynamic threshold circuit, which can detect suitable shade variations, and an image processing circuit, which allows zooming, automatic separation between text and photographs, and image emphasis, further improving scanning quality.

Compact, lightweight

The superb capabilities of the Fujitsu image scanners have not been achieved at the expense of compactness. They are enhanced by their small size and light weight.


Technical Specifications:

Operating method ADF (Automatic Document Feeder) and FB (Flatbed)
Image sensor CCD (Charge-Coupled Device) Image sensor
Light source Xe discharge tube (Green)
Document size Minimum : A5 or 5.8 x 8.3 in.
Maximum : A3 or Double letter (11 x 17 in.)
Paper weight for ADF 52 to 104g/㎡ (14 to 28 lb)
Output resolution 200, 240, 300, 400 dpi (selectable)
Scanning speed
(mechanical) ADF Simplex Scanning 21 ppm for A4 portrait format at 200dpi
22 ppm for letter format at 200dpi
Flatbed Scanning 2.0 sec. for A4 portrait format at 200dpi
5.6 sec. for A3 portrait format at 200dpi
Grayscale level (internal) 256 levels image data processing in the scanner
Halftone patterns Dither ; Error diffusion
Capacity of ADF Maximum 50 sheets
paper weight : 64g/㎡ (17 lbs), A4
Interface M3096GX : SCSI-2
Video output M3096GX : Binary, 8-bit gray level
Power requirements 100-120 VAC 50/60Hz, 200-240 VAC 50/60Hz
Operating environment Temperature : 5-35 (degrees Centigrade) (42F to 95F)
Relative humidity : 20%-80%
Dimensions
(W x D x H) 696 x 497 x 173mm (27.4 x 19.6 x 6.8 in.)
Weight 17.5kg (38.6 lbs.)
Options 1. IPC-2 board
(1) IPC functions

* Dither pattern download
* Automatic binarization
* Automatic separation between photographs and text
* Zooming:25% to 100% by 1% steps
* Outline extraction
* Image emphasis
* Mirror image
* Reverse image
* Clipping

(2) DTC functions

* Spot noise removing
* Dynamic threshold
* Gamma curve correction
* Filtering
* Threshold curve selection
* Smoothing

2. CMP2 (for M3096GX only)

* 4 Mbyte memory
* MH/MR/MMR compression
    • SKU
      SKU48
    • Weight
      85.0000 lbs
  • Manufacturer
    Fujitsu, Stryker
  • Product Added Date
    2/28/2023
  • Inventory Added Date
    2/28/2023
  • Condition Code
    Refurbished
  • Bin Location
    OB-N6
  • P/N
    M3096G, QP27-1255
  • BB Condition Code
    Ref
  • Local Inventory
    1
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Footer navigation